Posted by Marketing on November 02 2018 in News Press Pads
“Do you have to bed the pads in before use?”
Optimising press pad life and usability
One of the most important procedures for optimizing press pad life is to remember to install them without over-tensioning.
“How many cycles are required before applying extra tension to the press pad?”
We recommend that the press pads be...
Posted by Marketing on October 19 2018 in News Press Pads
“Do you supply a press pad for deep structure applications?”
The answer is yes. We can produce high performance press pads that are designed with additional compensation in mind, with an ability to absorb pressure for deep structure applications.
Unique silicone technology provides superior compensation properties
All of our pressure compensating mats are used...
Posted by Marketing on October 05 2018 in News Press Pads
“What is the lead time for your press pads?”
We are almost always able to despatch customer requirements within 10-14 days from receipt of order, dependent upon order quantity.
In the case of large or bespoke orders, the lead time will be extended but we will endeavour to deliver what you need within...
Posted by Marketing on September 07 2018 in News Press Pads
“What is the maximum width of press pads that you can supply?”
Marathon supply a broad range of pressure compensating pads used in the production of various laminated products, including different lengths, widths, weights and thicknesses, all engineered for specific applications.
This ensures that all production, technical and manufacturing plate processes can be fully catered for.
Posted by Marketing on August 24 2018 in News Press Pads
“Can you provide press pads for HPL applications?”
A number of HPL (High Pressure Laminate) producers have asked Marathon whether they are capable of manufacturing press pads for these specific applications.
Marathon understand that HPL is a compulsory requirement for certain high-end applications
High pressure laminates are considered to be one of the...
Posted by Marketing on August 10 2018 in News Press Pads
“Which industries do you currently supply your press pads to?”
Marathon was formed in the UK in 1976, to fill a small niche as a woven conveyor belt manufacturer.
Since the early days, our market research, development and innovation has taken us into the field of specialized performance textiles for wide-ranging industrial applications, including pressure compensating...
Posted by Marketing on July 27 2018 in News Press Pads
“What lifetime can your press pads achieve?”
“Are Marathon’s pressure compensating mats up to the job?”
A press pad typically reaches the end of its life when it loses its compensation ability as the silicone finally gives up its attempt to return to its original configuration after repeated compression cycling. The...
Posted by Marketing on July 13 2018 in News Press Pads
“What is the fulcrum effect?”
The fulcrum effect occurs during the lamination process and can be a real problem for manufacturers.
When a board is being pressed (in a laminate press), the caul plate is larger in width and length than the board being pressed. This creates a margin...
Posted by Marketing on June 29 2018 in News Press Pads
“Do you have agents and/or distributors around the world?”
Marathon currently exports to over 120 countries worldwide, and works alongside a team of trusted agents that have been fully trained and have the necessary experience to sell their range of superior performance pressure compensating pads (Copsil™ and UltiMat™).
From their manufacturing base in...
Page 1 of 3 pages 1 2 3 >